n features l ul, csa, vde recognized l 1 form a (spst-no) or 1 form c (spdt) contact l low cost, miniature relay with big performance in small package surge strength: 4,000 v or 6,000 v l slim typemeets high density mounting requirement l wide operating range l easy circuit design with completely separated terminal arrangement (coil and contact terminals) l plastic sealed type l lead free since date code: 0434r please see page 7 for more information (a) series name ve: ve series (b) nominal voltage refer to the coil data chart (c) contact rating h : heavy duty type (d) contact arrangement nil : 1 form c (spdt) m : 1 form a (spst-no) (e) coil type nil : standard type s : high sensitivity type (f) contact material (rating) nil : gold overlay silver-nickel (n.c.: 3 a, n.o.: 5 a) e : silver-nickel (n.c.: 3 a, n.o.: 5 a) 5 : silver cadmium oxide (n.c.: 5 a, n.o.: 5 a) (g) enclosure k : plastic sealed type (h) surge strength nil : standard type (4,000 v) hv: high dielectric strength type (6,000 v) (i) standard vd: ul, csa, vde approved type note: actual marking omits the hyphen (-) of ( * ) n ordering information ve C 12 h m s e C k C hv C vd [example] (a) ( * ) (b) (c) (d) (e) (f ) (g) (h) ( i ) ve series power relay 1 pole 5 a (medium load control) 1 lead free
2 ve series n safety standard and file numbers ul508 (file no. e56140) c22.2 no. 14 (file no. lr35579) vde 0435 (file no. 11039-4940-1011) please note that ul/csa ratings may differ from the standard ratings. type nominal voltage contact rating ve-h 5 to 48 vdc normally open: 1/14 hp 125 vac/250 vac 5 a 30 vdc/250 vac, resistive pilot duty d300 normally close: 1/14 hp 125 vac/250 vac 3 a 30 vdc/250 vac, resistive pilot duty d150 ve-hm 5 to 48 vdc 1/12 hp 125 vac/250 vac 5 a 30 vdc/250 vac, resistive pilot duty d300 ve-h5 5 to 48 vdc normally open: ve-hm5 1/10 hp 125 vac/250 vac 5 a 30 vdc/250 vac, resistive pilot duty d300 normally close: 1/14 hp 125 vac/250 vac 5 a 30 vdc/250 vac, resistive
3 ve series item ve-( ) hme-k ve-( ) he-k ve-( ) hm5-k ve-( ) h5-k ve-( ) hm-k ve-( ) h-k contact arrangement 1 form a (spst-no) 1 form c (spdt) 1 form a (spst-no) 1 form c (spdt) material gold overlay silver nickel, silver nickel silver-cadmium oxide alloy style single resistance (initial) (at 1 a 6 vdc) maximum 70 m w (ve-hm, h) maximum 200 m w maximum 100 m w (ve-hme, he) rating (resistive) 5 a 250 vac 5 a 250 vac (n.o.) 5 a 250 vac 3 a 250 vac (n.c.) maximum carrying current 7 a maximum switching power 1,250 va maximum switching voltage 250 vac, 150 vdc maximum switching current 5 a 5 a (n.o.) 5 a 3 a (n.c.) minimum switching load* 1 10 ma, 5 vdc (ve-hm, h), 100 ma 5 vdc (ve-hme, he, hm5, h5) coil nominal power (at 20 c) standard type: 0.36 w. high sensitivity type: 0.25 w operate power (at 20 c) standard type: 0.177 w. high sensitivity type: 0.13 w operating temperature standard: C40 c to +85 c. high sensitivity: C40 c to +90 c (no frost) time value operate (at nominal voltage) maximum 10 ms release (at nominal voltage) maximum 5 ms insulation resistance (at 500 vdc) minimum 1,000 m w between open 1,000 vac 1 minute 750 vac 1 minute 1,000 vac 1 minute 750 vac 1 minute dielectric contacts strength between coil 2,000 vac 1 minute and contacts surge strength standard type: 4,000 v (at 2 x 10 m s) high dielectric strength type: 6,000 v (at 2 10 m s) life mechanical 1 10 7 operations minimum electrical (at rating) standard type: 1 10 5 ops. min. high sensitivity type: 5 x 10 4 ops. min. other vibration misoperation 10 to 55 hz (double amplitude of 3.3 mm) resistance endurance 10 to 55 hz (double amplitude of 3.3 mm) shock misoperation 100 m/s 2 (11 1 ms) resistance endurance 500 m/s 2 (6 1 ms) weight approximately 8 g n specifications * 1 minimum switching loads mentioned above are reference values. please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 1,250 va (n.o.) 750 va (n.c.) 1,250 va
4 ve series n coil data chart model nominal coil must must nominal ve-( ) hm ve-( ) hme ve-( ) hm5 voltage resistance operate release power ve-( ) h ve-( ) he ve-( ) h5 ( 10%) voltage voltage ve- 5h (m) (e)-k ve- 5h (m) (e) 5-k 5 vdc 69 w 3.5 vdc 0.25 vdc 360 mw ve- 6h (m) (e)-k ve- 6h (m) (e) 5-k 6 vdc 100 w 4.2 vdc 0.3 vdc 360 mw ve- 9h (m) (e)-k ve- 9h (m) (e) 5-k 9 vdc 225 w 6.3 vdc 0.45 vdc 360 mw ve 12h (m) (e)-k ve-12h (m) (e) 5-k 12 vdc 400 w 8.4 vdc 0.6 vdc 360 mw ve-18h (m) (e)-k ve-18h (m) (e) 5-k 18 vdc 900 w 12.6 vdc 0.9 vdc 360 mw ve-24h (m) (e)-k ve-24h (m) (e) 5-k 24 vdc 1,600 w 16.8 vdc 1.2 vdc 360 mw ve-48h (m) (e)-k ve-48h (m) (e) 5-k 48 vdc 6,400 w 33.6 vdc 2.4 vdc 360 mw ve- 5h (m) s (e)-k ve- 5h (m) s5-k 5 vdc 100 w 3.6 vdc 0.25 vdc 250 mw ve- 6h (m) s (e)-k ve- 6h (m) s5-k 6 vdc 145 w 4.3 vdc 0.3 vdc 250 mw ve- 9h (m) s (e)-k ve- 9h (m) s5-k 9 vdc 325 w 6.5 vdc 0.45 vdc 250 mw ve 12h (m) s (e)-k ve-12h (m) s5-k 12 vdc 575 w 8.6 vdc 0.6 vdc 250 mw ve-18h (m) s (e)-k ve-18h (m) s5-k 18 vdc 1,300 w 13.0 vdc 0.9 vdc 250 mw ve-24h (m) s (e)-k ve-24h (m) s5-k 24 vdc 2,310 w 17.3 vdc 1.2 vdc 250 mw ve-48h (m) s (e)-k ve-48h (m) s5-k 48 vdc 9,220 w 34.7 vdc 2.4 vdc 250 mw high sensitive type standard type n characteristic data note: all values in the table are measured at 20 c.
5 ve series n reference data
6 ve series n dimensions ve-m type ve type l dimensions l schematics (bottom view) l pc board mounting hole layout (bottom view) unit: mm
7 ve series 1. general information l relays produced after the specific date code that is indicated on each data sheet are lead-free now. most of our signal and power relays are lead-free. please refer to lead-free status info. (http://www.fcai.fujitsu.com/pdf/leadfreeletter.pdf) l lead free solder paste used in relays is sn-3.0ag-0.5cu l most signal and some power relays also comply with rohs. please refer to individual data sheets. relays that are rohs compliant do not contain the 6 hazardous materials that are restricted by rohs directive (lead, mercury, cadmium, chromium iv, pbb, pbde). l it has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l lf is marked on each outer and inner carton. (no marking on individual relays). l to avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. we will ship leaded relays as long as the leaded relay inventory exists. 2. recommended lead free solder profile l recommended solder paste sn-3.0ag-0.5cu rohs compliance and lead free relay information reflow solder condtion 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical realys. 4. tin whisker l snagcu solder is known as low riskof tin whisker. no considerable length whisker was found by our in-house test. flow solder condtion: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c soler bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec. max. 120 sec. 9 0 ~ 120 sec. 20 ~ 3 0 sec. (dur a tion) cooling pre-heat ing s ol d er ing p ea k t em p . : max. 2 5 0 ?c 2 5 0 220 1 3 0 1 7 0 t em p e r a tur e ( ?c ) we highly recommend that you confirm your actual solder conditions
8 ve series ? 2004 fujitsu components america, inc. all company and product names are trademarks or registered trademarks of their respective owners. rev. 11/11/2004. japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: marcom@fcai.fujitsu.com web: www.fcai.fujitsu.com europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: www.fceu.fujitsu.com asia pacific fujitsu components asia ltd. 102e pasir panjang road #04-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com fujitsu components international headquarter offices
|
